December 2, 2016 / como / 0 Comments
Phazzer air stun guns are one of the most effective self defense weapons available within the US. Designed to rival the Taser electronic control device, they are capable of disabling an escaping perpetrator from a safe distance away.
The Phazzer is an electroshock weapon that uses electrical current delivered via darts which are shot through the air attached by wires. They are considered by many to be excellent non-lethal weapons for self defense and here’s why. Air stun guns will temporarily disable an attacker when high-energy, low amperage electricity from one of these devices passes through clothing and skin, and enters the body. Any effects caused are not permanent. Getting acquainted with and acquiring the proper self defense arsenal is the first step in demonstrating how much we value our own safety.
The air stun gun’s function is to stun the aggressor with electrical energy charges and the Phazzer falls under this category of arsenal. The devices emitters are fired from the mechanism like a conventional gun but are connected to wires that conduct electricity. An electrical current travels via two wires to the emitters which act like darts and attach themselves to the attackers skin or clothing. The air stun gun is makes ideal as an effective device for self protection because it has long range capability. The Phazzer allows you to be at a distance from the assailant and still work. You can disable an attacker from up to 25 feet away.
Phazzers are a popular choice for self defense since they cost a lot less than their closest competitor, the Taser electronic control device. In addition, no criminal background check is ever required to use the Phazzer, unlike the Taser which requires you to have a criminal background check and pay a fee for it.
Phazzer Electronics Inc. makes some exceptional air stun guns for self defense. Two worth noting are the Dragon and the Enforcer. Both the Phazzer Dragon and Phazzer Enforcer air stun gun are effective non-lethal weapons in protecting the users safety. They provide a safe alternative to the use of deadly force in the defense of personal safety instead of injuring the target. These air tasers have been tested for safety and will substantially reduce the likelihood of serious harm or death as compared to alternative methods of self defense. The Phazzer is one of the most effective alternatives to the use of more substantial force when it is unnecessary. Both devices have been field tested for accuracy and effectiveness, and have consistently subdued their target within 2 to 5 seconds upon contact. The Dragon can also be used as a traditional hand-held stun gun after the dart cartridge has been released from the device. In addition to the projectile electrodes which stun an attacker, the Enforcer offers pepper ball cartridges. The pepper ball cartridges shoot pepper balls which explode on the target and is the same as hitting them with pepper spray.
Phazzers are very effective less-than-lethal devices. Law enforcement, armed forces and individuals worldwide use stun devices for self protection. You will have to decide for yourself if a stun device is right for you. You may want to make that decision based on ease of use, what you know about the weapon and if you will be able to effectively use it to fend off an attack.
December 2, 2016 / como / 0 Comments
While household items like furniture are very straightforward to put into self storage, what do you do about electronics and computers? These delicate items must be carefully packed and stored to prevent damage. While water is obviously hazardous, extreme heat and cold can also damage electronics.
Here are some tips to keep your electronics safe in storage.
Why Should You Avoid Storing Electronics?
Before we discuss the best ways to store electronics, it’s important to understand why you should avoid putting electronics into self storage at all, if possible. When the weather gets hot, the temperature inside storage units skyrockets, just like a car, unless the unit is climate controlled. This can easily destroy sensitive electronics, including computers and flat-screen televisions.
Choosing the Right Storage Unit
Most self storage facilities have several types of units to choose among. With electronics, you will always want an indoor climate controlled storage unit. The temperature in these units remains between 50 and 80 degrees with central heat and air, which prevents corrosion or cracks that damage electrical components.
Moisture control is just as important as temperature control when you choose a self storage company. Choose a company that uses a dehumidifier to keep out dampness if you live in a humid climate.
Tips for Safe Electronics Storage
Always begin by backing up all important information and storing it elsewhere. Take the tapes out of any VCRs or devices, and the CDs and DVDs out of drives and players. Equipment should be covered with cotton sheets or canvas — never plastic — to allow air to circulate. Plastic should never be used, as it traps in moisture. If you can, store your devices in their original boxes.
While your storage unit is empty, add pallets or boards to raise your electronics off the floor. Use cardboard or bubble wrap to protect screens, scanners or monitors and mark all glass parts as fragile to avoid placing any heavy or sharp objects against them.
If you have any questions about how to safely store your electronics, check with the self storage facility manager. You may also want to ask about storage insurance, particularly if you are going to store valuables. Above all else, remember that you should never store anything that you can’t replace. Think carefully about storing electronics, as they are at a greater risk of being damaged in storage from the elements and no one wants to pay to store something that is no longer functioning.
November 27, 2016 / como / 0 Comments
Judge issues must be handled after hsien Chu, clear, severe, small problems. Short circuit LED fluorescent lighting should be the highest priority.
1, resistance detection method, adjust the multimeter to resistance, detect a normal circuit board of a point of resistance, then testing another piece of the same circuit board with a points test and normal resistance values are different, different if you determine the scope of the problem.
2 voltage detector, multimeter voltage regulation, detecting suspect circuit voltage of a point, are similar to the normal, or determine the scope of the problem.
3, short circuit LED Flood Light Supplier detection, adjust the multimeter to the short block (some diodes voltage drop or resistance stalls, usually with alarm function), checks for short circuits happen, after finding the short circuit should give priority to, so that it does not burn out other devices. The method you must do so in the case of power off circuit, preventing damage to the table.
Detection method 4, pressure drop, adjust the multimeter to diode voltage drop test document, because all of the IC is made of numerous basic components, but small, so when it comes on a PIN when there is current through, there is a flexible led strip lighting voltage drop on the PIN. General of the same model similar to the pressure drop on the same IC pins, based on pressure drop in PIN value comparison, operation must be power off circuit. The method has some limitations, such as the detected devices are high impedance, not detected. Four processing steps, panels-frequently asked questions Board failure:
A. Panel is not lit
1, check the power supply and the power supply is connected.
2, check whether the test card to identify interfaces, test card red light flashing is not recognized, check whether the lamp power with test cards, or the lamp panel connector interface signal and the short-circuit caused no recognition. (Smart test card)
3, detect 74HC245 deficiency-free welding short circuit, on 245 (EN) signal input or output pin is a virtual welding short circuit to the other lines. Note: the main power and enable (EN) signal.
B. helical scan, regularity of interlacing is not lit display overlapping
A, b, c, d, 1, check whether the signal input to the 245 disconnection or Xu Han and short circuit.
2, testing corresponds to 245 outputs a, b, c, d or Xu Han, short circuit between 138 and circuit breakers.
Detection of 3, a, b, c, d between the signal short circuit or a signal and the short-circuit. Note: the main test ABCD signaling.
C. iseedeadpeople with line or lines are not lit
138 per cent between 1, detection or virtual welding line circuit breakers, short circuit.
D. scan, two or more rows (typically are multiples of 2, law) at the light
1, a, b, c, d, the signal is detected between the short circuit.
2, detect whether 4,953 output and output short circuit.
E. iseedeadpeople with single-point or multi-point (irregular) is not lit
1, find the module corresponds to the measurement and control foot line short circuit.
2, replace the module, or a single lamp.
F. iseedeadpeople has one or more columns is not lit
1, found on the module controlling the PIN, measure and driver IC (74HC595/TB62726) output port connection.
G. single point or highlight a single column, or entire row highlighted, and is not subject to control
1, check whether the column is short circuit and power supply.
2, test the line with power-cathode short-circuit.
3, replace the drive IC.
H. display confusion, but the output signal of a Board under the normal
245 corresponds STB latched outputs 1, detection and driver IC latch-side connections or signal short circuit to the other lines.
I. display confusion does not output correctly
1, detection of clock signal CLK latch STB is shorted.
2, measuring 245 clock CLK input/output.
3, tests whether the clock signal short circuit to the other lines.
Note: the main clock and latch signal is detected.
J. display the missing colors
245 1, detection of the color data of the port has input and output.
2, test whether the data of the color signal short circuit to the other lines.
3, test the color of cascade data between the driving IC is short circuit, virtual circuit breakers or welding. Note: the available voltage detection method is easier to find the problem, test voltage is different from normal data, determine the fault zone.
K. output problem
1, test the output interface to the signal output of the IC line connection or short circuit.
2, the output latch of the clock signal is detected correctly.
3, testing the last drive IC between concatenated output data and the output interface data port connection or short circuit.
4, the output signal is a short circuit or a short circuit to ground.
5, check the output of the cable is good.
November 26, 2016 / como / 0 Comments
Refurbished Electronics offer great savings. However, they come with a shorter warranty. New electronics can be very expensive; but they come with a longer warranty. It really comes down to your personal preference.
Refurbished electronics advantages are too numerous to list in this single article. The price difference between new electronics and refurbished ones is probably the most important of all the advantages of refurbished electronics. However refurbished products do have their disadvantages also. -There is no benefit without cost and there is no cost without benefit.- We do not know who made this statement; but we know it has to do with economics.
This economics principle stands true when it comes to refurbished electronics advantages and disadvantages. Should you buy brand new electronics or refurbished electronics? Obviously, that is a question only you can answer.
In spite of the great price benefit that comes with buying refurbished electronics, some people still prefer to buy brand new even if that means more debt. Others would prefer to save the money and buy only refurbished electronics. It is all a matter of personal preference and opportunity costs. The best we can do is to point out some of refurbished electronics advantages and disadvantages. Refurbished Electronics: Advantages and Disadvantages
1. Refurbished electronics can be up to 80% cheaper than new ones. For example, a refurbished Samsung HP-R4252, 42- Plasma HDTV with turner and all the bells and whistles costs about $750.00. A new one costs about $3,200.00. That is a 76% off from the original price.Clearly these are some great refurbished electronics advantages.
2. If you were to add $249.99 for a 3 year extended warranty onto the already discounted price ; you would pay roughly one-third (1/3) of the original price. That is, [($750.00 + 249.99)/ $3,200.00]X100= 31%, roughly 1/3 of the price.
3. Refurbished electronics sport the exact same technology as new ones.
4. Other refurbished electronics advantages come in the form of reliability. These products are rigorously tested for optimum performance. They must meet the same factory specifications as new ones.
In our opinion, there is one disadvantage with refurbished electronics – the manufacturer warranty. You only have a 90-day warranty on refurbished electronics instead of the standard 1-year warranty.
While some people may fuss about that, we believe it is a fair deal. Since the refurbished item has been thoroughly tested and met factory specifications, nine months worth of warranty is served through the refurbishing process.
However, if you insist on having a longer warranty you can buy an extended warranty for 3 to 5 years ranging in price form $30.00 to $150.00 and up respectively. Note that even with the added extended warranty you still save a boatload of money.
So, buying refurbished electronics give you the opportunity to own a high end, late model electronic gadget without swiping away your life savings. Way to go! Buy refurbished electronics!
New Electronics: Advantages and Disadvantages
There is only one advantage in buying brand new electronics – The warranty. Unlike refurbished electronics, new items are sold with a 1-year warranty. You can buy a refurbished electronic, then buy an extended warranty for the peace of mind. You will still have a better deal.
The one year warranty that comes with the new item makes perfect sense. Manufacturers do not test every new product. They simply test a sample from a batch.
If the percentage of successful tests satisfied a pre-set standard; they assume that all products from the batch will work. The truth is there is no guarantee they will. That is why they give a full year warranty on them.
New items are only randomly tested. So they are susceptible to breaking down. For this reason, a longer warranty is offered on it. It is clear that refurbished electronics advantages outweigh new electronics advantages.
Our advice is simple; you don’t need to work your life away for a one year warranty. You can enjoy a greater peace of mind if you buy an extended warranty on refurbished electronics. Just remember:
Refurbished electronics are tech
November 26, 2016 / como / 0 Comments
In this day and time it’s getting a lot easier and more convenient to shop online for electronics, but you must take certain precautions when you are visiting consumer electronic websites. One thing to remember is that all websites are not created equal and their are some things I want to point out to you that will help you a great deal when you are shopping online.
How does the website look?
Does the website look like it’s something that your little brother or sister tried to put up in one day? It takes a lot of time to build a quality website that’s neat and easy for you to navigate and understand. Also on the other hand you don’t want to get to a electronics website and to be bombarded with too much information. This is something that I see a lot of today.
The website should be simple, safe and easy to navigate. Their’s nothing more frustrating than to go to a site that’s not working properly.
Are the links working on the website?
How many websites have you been to and the links are not working properly? This is a huge red flag if their are links that give you that dreaded 404 error code. A well run electronics website should never have any bad links. If you come run into this problem simply e-mail or contact the owner stating the problem that occurred. The owner way even give you a special discount for doing so.
It’s a very uneasy feeling if you go to a website, whipped out you credit card, clicked on the item you wanted to buy only to find out the link doesn’t work? I don’t know about you, but my credit card would quickly go back into my pocket! Then I will be looking for another online electronics website to shop at.
Does the website have security banners?
Make sure the website that you would like to make a purchase has taken some security measures to safe guard your information. Most of the security seals or banners are located in prominent area of the website, usually on the top right hand side and at the bottom. If you don’t see this most likely this particular website doesn’t place high regard to your personal information.
Read all of the information that is in the privacy policy. The privacy policy will state what the website does with all of the information that it receives from you. You should avoid making purchases on sites that doesn’t have this basic information.
These are some simple and practical steps that you can take that will save you a ton of grief. It’s best to do an internet search on the site if you feel uneasy about it in any way. If the bad outweighs the good just simply move on to another electronics website.
Hope the tips that I shared with you will help the next time that you go online to shop.